Dry Type Copper Wire Cable Granulator

Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
copper cable granulator for sale General Introduction 
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobile 
wires, telecommunication wires, and other kinds of copper wires, in order to recover 
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..


copper cable granulator for sale Main Features: 
1.  No water needed, just put cable wires into the plant 
2.  Turnkey and compact type, PLC controller, 
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires


Final Copper&plastic granules output:
Dry Type Copper Wire Cable Granulator
copper cable granulator for sale Working Process: 
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.

copper cable granulator for sale Technical Parameters: 
Model  Processing
capacity
Processed wire dia. Total power Voltage Dimension  Weight 
FC-400-1 80-120kg/h

0.3-20mm
11.92KW

customized
1.5*1.5*1.9m 750kg
FC-400 200-250kg/h 23.12KW 2.7*1.9*2.3m 1200kg
FC-600A 300-400kg/h 48.36KW 4*1.85*2.4m 3400kg
FC-600 300-400kg/h 52.36KW 4.3*1.95*2.4m 3400kg
FC-800 600-800kg/h 0.1-40mm 75.4KW 9.1*2.3*3.54m 8000kg
FC-1200 1000-1200kg/h 129.6KW 16*10*3m 12000kg

Different Models of copper wire granulator machine: 
Dry Type Copper Wire Cable Granulator
Dry Type Copper Wire Cable Granulator
Dry Type Copper Wire Cable Granulator
Dry Type Copper Wire Cable Granulator
Dry Type Copper Wire Cable Granulator


Contact us freely for more detailed quotation. 
 
copper cable granulator for sale General Introduction 
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobile 
wires, telecommunication wires, and other kinds of copper wires, in order to recover 
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..


copper cable granulator for sale Main Features: 
1.  No water needed, just put cable wires into the plant 
2.  Turnkey and compact type, PLC controller, 
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires


Final Copper&plastic granules output:
Dry Type Copper Wire Cable Granulator
copper cable granulator for sale Working Process: 
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.

copper cable granulator for sale Technical Parameters: 
Model  Processing
capacity
Processed wire dia. Total power Voltage Dimension  Weight 
FC-400-1 80-120kg/h

0.3-20mm
11.92KW

customized
1.5*1.5*1.9m 750kg
FC-400 200-250kg/h 23.12KW 2.7*1.9*2.3m 1200kg
FC-600A 300-400kg/h 48.36KW 4*1.85*2.4m 3400kg
FC-600 300-400kg/h 52.36KW 4.3*1.95*2.4m 3400kg
FC-800 600-800kg/h 0.1-40mm 75.4KW 9.1*2.3*3.54m 8000kg
FC-1200 1000-1200kg/h 129.6KW 16*10*3m 12000kg

Different Models of copper wire granulator machine: 
Dry Type Copper Wire Cable Granulator
Dry Type Copper Wire Cable Granulator
Dry Type Copper Wire Cable Granulator
Dry Type Copper Wire Cable Granulator
Dry Type Copper Wire Cable Granulator


Contact us freely for more detailed quotation. 
 

Advanced technology and optimal design in harmony. 

8.4 inch touch screen display in English,usar-friendly interface. 

The use of multi CPU control, the high system response speed, high control accurancy, positioning accurancy 0.01mm. 

We offer five servo motor robot controller, three servo motor robot contorller, two servo motor controller, and single motor robot controller. 

The machine parameters, mold number procedures can be imported and exported through the U disk in different machines. 

U disk upgarde, customer can upgrade trhe latest system, continue to get stable support. 

HIgh speed of I/O transmission technology, so that the robot speed is faster, can shorten the cycle time of more than 10 %. 

The control precision is greatly improved, the control precision of all the time is up to 0.01 seconds. which can be more accurate with the mold out of product, shorten the time to remove the robot, improve the efficiency of the injection molding machine. 

Robot And Conveyor For Plastic Parts

Robot And Conveyor For Plastic Parts,Conveyor For Plastic Parts,Conveyor Spare Parts Use In Plastic,Plastic Conveyor Products

Ningbo Tongyong Plastic Machinery Manufacturering Co. Ltd. , https://www.tongyong-machinery.com