OverviewÂ
1. This equipment is a kind of suitable for the hospital medical waste, life rubbish, dead animals, the villages and towns of urban garbage disposal and so on various aspects non-hazardous wastes treatment equipment.
2. Â Simple and convenient operation, high burning temperature and burning of organic matter removal rate was 99%, Fast burning speed, effectively.Covers an area of small, low cost, low malfunction,easy maintenance.
FeaturesÂ
· A combustion chamber temperature 650 ~ 850 ºC, fuel completely ashing, reduced capacity more than 97% or higher;The furnace heating up fast, fuel consumption, burning full.
· 100% low excess air coefficient, using vortex combustion process.
· Low temperature control system design, operation cost is low, the use of cold heat exchanger cooling process can realize resource recycling.
· Cover an area of an area small, simple operation, convenient maintenance.
Advantages
1. Long lifetime.
2. Totally enclosed operation.
3. Suitable for treating infectious waste.
4. Avoid secondary pollution.
5. Simple operation.
DescriptionÂ
medical waste, dead animals, Marine garbage incineration or general enterprises of garbage, street leaves, town hospital, living garbage, laboratory waste etc. 
Incineration system
1.Furnace body is made up of refractory materials, insulation materials, insulation materials,   laying on the top of the cavity of grate outsourcing steel plate to prevent gas leakage and    the furnace body surface temperature is less than 50 ºC.In the furnace body is equipped with the access door side, auxiliary ignition burner on the side, too.The furnace body is equipped with work station.
2.Flue gas in the chamber of a stove or furnace from the bottom to wash the material, the moisture in the material drying, make material on fire in time. And arch before and after the refractory material accumulation of heat and radiation, so as to ensure the material combustion temperature.Prolong the residence time of flue gas, make the material and fly ash in the organic matter complete combustion, increase the destruction rate of harmful substances.
3.Furnace body in high temperature refractory lining, insulating material, is among the outer layer is a thermal insulation material, can reduce furnace body heat loss, improve the efficiency of burning;Appearance using steel plate as a protective layer to prevent air leakage;The refractory is developed by our company and building materials science research institute an acidic gas corrosion resistant, high temperature resistant, high strength refractory materials.
The main technical parameters
| Model | ZTFS-25 | ZTFS-20-25 | ZTFS-20-60 | ZTFS-20-120 | ZTFS-150-400 |
| Burning | dogs, cats | rat, rabbit, monkey, dog | chicken, duck, goose, birds | pig | pigs, horses, cattle |
| Processing (kg/batch) |
25 | 20-25 | 20-60 | 20-120 | 150-400 |
| Volume (m³) |
2.5 | 2.5 | 3.0 | 8.0 | 16.0 |
| Power consumption (kw/h) |
2 | 2-4 | 2-5 | 3-12 | 15-50 |
| Fuel consumption (L/h) |
3 | 3-10 | 3-12 | 4-15 | 20-60 |
| Equipment size (mm) |
2500×1500 ×1400 |
2300×1200 ×2100 |
2200×1300 ×2300 |
2500×2300 ×3000 |
3000×4000 ×2800 |
| Weight(t) | 1 | 3-8 | 4-8 | 4-12 | 15-45 |
Our company supplies different kinds of products. High quality and favorable price. We're pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of " Quality first, service first, continuous improvement and innovation to meet the customers" For the management and " Zero defect, zero complaints" As the quality objective.
What We Have Â
1. China Leading Producing Technology
2. Super High Quality
3. Competitive Price
4. Big Production Ability
5. Fast Delivery
6. Excellent Sale and After-sale Service
------------------------------------------------FAQ------------------------------------------------
1, Are you manufacturer?
Yes, we are manufacturer with more than 15 years' experience.
2,Can you ship the machine to my address?
Yes, we could use DHL to express the machine. While transport cost will be higher than by sea.Â
3, Where are you? Can we go to China and visit your factory?
Yes, of course. We are in Shandong, China. Welcome to our factory.
4, Do you have manual with the machine?
Yes, of course. It is in English version.
5, Can you offer us the necessary paper to do the customs clearance?
Yes, of course. We will send you the commercial invoice, sales contract,Â
packing list, bill of lading(FOB or CFR, CIF terms), insurance policy (if CIF terms), also CO if you need.
Customers to buy our company products are sold, is only the beginning of the relationship with our company, is the beginning of the after-sales service work, in the whole stage of customers to use the machine, we all after-sales service staff with thoughtful, meticulous, enthusiastic, timely service, let customers at ease, worry-free use of equipment, can really experience the our products bring convenience and create value for customers.
All equipment produced by our company can customize according to customer's requirements.
Thank you for your attention to our products, if you want to know more information, please feel free to contact us, we sincerely provide you with the most satisfactory service!
Main products
1. Incinerator
2. marine incinerator
3. Medical incinerators
4. Hospital use incinerator
5. Garbage incinerator
6. Pet incineartor
7. Waste incinerator
8. Small incinerator
9. Gas Generator
10. Dead animal incinerator
11. kitchen waste incinerator
12. municipal waste shredder
13. marine shredder
14. industrial incinerator factory
15. living garbage incinerator
16. garbage treatment incinerator
17. animal incinerators
18. crematorium the incinerator for cows
19. OEM accepted