HIGH SPEED FLAT CAM SIX SHUTTLE CIRCULAR LOOM


PERFORMANCE AND CHARCTERISTICS
Our company has recently developed the flat cam high speed six shuttle circular loom (SJ-FYB850-6 Model),it is specially designed to make high quality tube fabric from plastic tapes,and the finished the tube fabric can be widely used to make chemical bag, cement bag, rice bags, flour bag, feed bag and so on.

Main performance:

1. Use the DELTA servo motor to drive the cam mechanism, avoid to use the complex driving mechanism, this has the advantages of high efficiency, energy saving, consumption reduction, stable operation and low failure.
2. Use the DELTA intelligent lifting system and press sensor to be compensated automatically, completely eradicate the fabric dense and parse phenomenon when start or stop the machine.
3. Use the BETA bobbin sensor and weft sensor, with automatic warp tape feeding system,signal transmission system for weft tape break down and weft tape finish,automatic rewinding system,all of these provide good conditions to make the high quality fabric.
4. The man-machine interface operation, powerful, centralized control, and easy to operate.

 
MAJOR TECHNICAL PARAMETERS
SJ-FYB850-6 CIRCULAR LOOM COMPLETE MACHINE SET MAJORLY FORMED BY MACHINE BODY, WINDING-UP MECHANISM, TWO BOBBIN SHELVES, SURFACE WINDER AND ELECTRONIC CABINET MAJOR TECHNICAL PAPAMETERS AS FOLLOWS:

SHUTTLE QUANTITY: 6 PCS,                     WEAVING WIDTH: 300-850 mm
MAX QUANTITY OF WARPS: 720PCS        MAIN MACHIN ROTATION SPEED: 130-160 rpm
PRIME MOTOR POWER: 3 KW                PRODUCTION SPEED: 110 - 160 M/H
INSTALLATION DIMENSION(L*W*H): 9000*2400*3000 MM   
WEIGHT:2000 KGS


 

Mattress Quality Control Conveyor ( Lifting & Flipping)

Motorized Rolling Conveyor
SL-MRC is an auxiliary equipment of mattress production line. Adopting
motorized rollers, with steady carrying and high efficiency.
Technical Specification:
Model SL-MRC
Standard size 2.5m / 6m (Will be made by order)
Carrying direction Straight direction
Carrying speed 12 m/min (Will be made by order)
Carrying capacity 200 kgs
Total power 750 W
Overall dimension 6000(L)x2110(W)x760(H) mm
Weight 930 kgs

CNC Glue Machine
This machine is mainly used for gluing the inner (or layers) of the mattress for
lamination. The sprayers movement from side to side, and the belt of working table`s
moving forward and backward are drived by servo motor, and controlled digitally. It
has the advantage of flexible and various spray route, accurate spray position and
high efficiency.
Technical specification:
Model SL-13SG-2H SL-13SG-2W
Numbers of sprayer 2 units 2 units
Glue type Hot melt Glue Water solution glue
Total power 7KW 3KW
Max width of mattress 2000mm (Automatic regulation)
Max height of mattress 400mm (Automatic regulation)
Max speed 20m/min (Automatic regulation)
Overall dimension 4500mm(L) x 2600mm(W) x 1600mm(H)

Mattress Conveyor

Mattress Conveyor,Mattress Turnover Conveyor,Mattress Upturned Conveyor,Automatic Mattress Conveyor

SOFTLIFE MATTRESS MACHINERY CO.,LTD , https://www.softlifefoammachine.com