Spiral Wound Gasket Outer/Center Ring

Star product:Spiral wound gasket from Sunwell seals/CG/CGI/IR/R Type
1.Products are manufactured in accordance with all relevant gasket standards.
2.All types of Spiral wound gaskets can be manufactured, CG, CGI, R, RIR, etc.
3.Our production capacity is 150,000 pcs per month.
4.Material combinations for all operating conditions. 
 
Sunwell seals spiral wound gaskets have 4 types:
1.SW600-R Basic Type
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.
2.SW600-IR Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.
3.SW600-CG Outer Ring Type 
Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.
 
4.SW600-CGI Inner & Outer Rings Type
A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.


Spiral wound gaskets

More information of spiral wound gaskets,please contact with sunwell seals,thanks.

SMT FUJI Joint Tape  Features:
1.New design special for FUJI machine  
2.Significant savings on production costs    
The feature:
    Significant savings on production costs  
    Increase Pick & Place machine output by 5%-30%  
    Reduce reel change downtime  
    Guarantees a precise connection of component reels (new design special for FUJI MACHINE)  
    Decrease machine abrasion by reducing the need to reload the feeder
    Increased efficiency by using all the components on the carrier tape

SMT FUJI Joint Tape

SMT FUJI Joint Tape,Silver Joint Tape,Fuji Reel Joint Tape,Fuji Joint Connector Tape

ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com