2 Post Clear Floor Car Lift. / Garage Equipment

Model NO.: MT-FCTP35A
Condition: New
Brand: Co-Win
Design: Two Post
Lifting Height: 1800mm
Motor Power: 2.2kw
Min Height: 120mm
Overall Height: 3730mm
Lifting Time: 40-50s
Weight: 650kg
Width Between Columns: 2850mm
Power Supply: 110V/230V/220V/380V
Transport Package: Standerd Exporting Package
Specification: 3759*530*770mm
Origin: China
HS Code: 84254290
Model NO.: MT-FCTP35A
Condition: New
Brand: Co-Win
Design: Two Post
Lifting Height: 1800mm
Motor Power: 2.2kw
Min Height: 120mm
Overall Height: 3730mm
Lifting Time: 40-50s
Weight: 650kg
Width Between Columns: 2850mm
Power Supply: 110V/230V/220V/380V
Transport Package: Standerd Exporting Package
Specification: 3759*530*770mm
Origin: China
HS Code: 84254290
Features:
1.Clear floor design makes easy working under beneath the cehicle.
2.By two cylinder,plate and wire rope chain balance system lifting off and landing smooth .
3.Hydraulic power unit configuration throttling device, can always adjust the rate of deline.
4.Manual lock release from two sides.
5.With 24V limit switch. Asymmetric column allows wider drive through clearance.
6.Rubber support pad with spiral adjust the height and in stages adjust the height, optional.
7.Rubber pad door-opening protection.
8.Toe protection.
9.Trucks adapter can optional. Have adopted 115% dynamic and 150% static loading tested.
10.CE approved 
 

Technical Specification

  Lifting   capacity    4000kg
  Minimum   height     120mm
  Overall   height     3730mm
  Overall width       3340mm
  Lifting   time    40-50s/50s
  Motor power       2.2kw
  Lifting   height    1800mm
  Weight        650kg
  Width between   columns   2850mm
  Overall Size   3750mm*530mm*770mm
  Power Supply   110v/230v/400v
 
2 Post Clear Floor Car Lift. / Garage Equipment
  Features:
1.Clear floor design makes easy working under beneath the cehicle.
2.By two cylinder,plate and wire rope chain balance system lifting off and landing smooth .
3.Hydraulic power unit configuration throttling device, can always adjust the rate of deline.
4.Manual lock release from two sides.
5.With 24V limit switch. Asymmetric column allows wider drive through clearance.
6.Rubber support pad with spiral adjust the height and in stages adjust the height, optional.
7.Rubber pad door-opening protection.
8.Toe protection.
9.Trucks adapter can optional. Have adopted 115% dynamic and 150% static loading tested.
10.CE approved 
 

Technical Specification

  Lifting   capacity    4000kg
  Minimum   height     120mm
  Overall   height     3730mm
  Overall width       3340mm
  Lifting   time    40-50s/50s
  Motor power       2.2kw
  Lifting   height    1800mm
  Weight        650kg
  Width between   columns   2850mm
  Overall Size   3750mm*530mm*770mm
  Power Supply   110v/230v/400v
 
2 Post Clear Floor Car Lift. / Garage Equipment
 


Ride on Troweling Machine is easily operated and ideally suited for floating and finishing the concrete surfaces of large areas. These units help produce high-tolerance concrete floors.

Ride-on Power Trowel works efficiently and cost-effective for accurate and highly productive finishing of large concrete surface and super FF flat floor tolerance.


Application:

Trowel machine can be widely used to warehouses, parking lots, squares, airports and buildings of concrete frame surface, smooth, trowel.  It`s the best choice for concrete construction.



Features:

-Low mainternance & Long-life design;

-Over-built gearbox assure long service life;

- Heavy weight design to assure superior finish;

-Safety designed guard ring;

-Height adjustable handle, assures operator comfort & easy control.

Ride On Power Trowel


FURD factory also produce Walk-behind Power Trowel, the size has 24" Walk-Behind Power Trowel, 30" walk-behind Power Trowel , 36" walk-behind power trowel and 46" walk-behind power trowel.

Walk Behind Power Trowel

Ride-on Power Trowel

Ride On Power Trowel,Troweling Machine,Concrete Trowel Machine,Concrete Power Trowel

Jining Furuide Machinery Manufacturing Co., Ltd. , https://www.vibratoryroller.nl