4 Cavities Plastic Injection Cup Mould

• Model NO.: YS313
• Surface Finish Process: Polishing
• Plastic Material: PET
• Application: Car, Household Appliances, Commodity, Electronic, Home Use
• Design Software: Pro-E
• Standard: HASCO
• Size: Varies Volume
• Mould Matieral: P20\S136\2316\#45\718/ Copper
• Warranty: 3, 000, 000 Times
• Trademark: Yongsheng
• Specification: SGS
• HS Code: 8480719090

• Shaping Mode: Injection Mould
• Mould Cavity: Multi Cavity
• Process Combination Type: Single-Process Mode
• Runner: Hot Runner
• Installation: Fixed
• Customized: Customized
• Cavity: 1/2/4/8/16/32
• Polish: High Polish
• Process: Hot/Cold
• Transport Package: Wooden Package
• Origin: China

1.ADVANTAGE:
1.Saving 10%-30% cost than others.
2. Direct factory price
3. Life:3, 000, 000 time
4.2D and 3D provided
5. Quick T1  time: 25-40 days
6.More than 15 years experience 
 
2.PICTURE:

 


3.MOULD  DESCRIPTION:
1.Cavity:1-72
2.Mould base material :P20 , 45# , 4CR13 , .ECT
3.Core&Cavity material : S136,718, P20,2378,2316,4CR13,P20 .ECT
4.Runner: Cold /Hot (LOCAL BRAND,HASCO,YUDO,HUSKY .ETC)
5.Life time:3,000,000 shots
6.Quick T1 time:25-40 days
7.Package:wooden case 
 
4.MOULD  MANUFACTURE  PROCESS:
Cap Mould : grinding→fly-cutter →CNC Milling→drilling→lathe→boring lathe→electric pulse →fine fly-cutter→polish→electroplate→install
 
Preform Mould: grinding→drilling→lathe→boring lathe→fine fly-cutter→polish→electroplate→install
Need vale ,itself-locking :new advanced needle vale gate system.each cavity is self-lock independently to ensure low decent ration of product.
The excellent hot runner design assures uniform heating and greatlyimproves the quality of plastic products
 
5.AFTER  SALE  SERVICE:
Any mould problem,we will provide free maintenance service
 
 
6. FLOW CHART
 
7.CONTACT   ME:
 

AMRTA series air cooled water modular chillers and heat pumps are designed for outdoor installation and generally for both commercial and industrial application with the ability of 24 hours/day operation. The units are factory tested and on site installation will be completed only by connecting with the water kit components and power supply.  The master module can work independently or together with up to 16 slave modules. Cooling capacity: 65kW- 260kW

Modular Scroll Water Chiller is with superior cooling systems, advanced control systems and reasonable structure assembly. Cooling capacity: 80kW, 120kW, 160kW.

This series Modular Water Chiller is used to provide chilled water and hot water. In order to ensure the reliable operation of the unit, there are certain limitations of using WW series unit, mainly by environmental factors. Customer or operator must know about the following working conditions.

1.Ambient Condition: Unit condition: the unit is designed for indoor. If outdoor installation is required, there should be reliable rainproof measures; Temperature condition: air temperature-15~43℃for operation, air and water temperature -25~55℃ for storing. Humidity conditions: relative humidity 5 ~ 80% (no condensation) for operation.

2. Power Supply: Rated voltage: 380V±5% for continuous work; 380V±10% for short-term work; Three-phase power imbalance voltage: the voltage negative sequence and zero sequence components should not exceed 2% of the positive sequence component. Frequency: 50Hz ± 1% for continuous work.

Characteristics:

1. The master module Water Chiller can work independently or together with up to 16 slave modules.

2. Air cooled modular chiller with V type heat exchanger: panels, frame and base are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.

3. 3-phase scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.

4. External rotor type axial fans, equipped with 3-pahse direct drive motors, low noise 9 poles, protection level IP54, provided with a protective outlet grille.

5. Evaporator built with high efficiency shell and tube type heat exchanger, factory insulated with flexible close cell material.

6. Condenser built with seamless copper tubes mechanically expanded into bule hydrophilic aluminum fins.

7. Electric panel consist of: compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display(display only for master/air cooled packaged chiller unit). automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.

Modular Water Chiller

Modular Water Chiller,Industrial Modular Water Chiller,Low Temperature Modular Water Chiller,Dairy Water Chiller

Jinan Amrta Air Conditioning Co.,Ltd , https://www.waterchiller.pl