Industrial Dust Collector Smoke Extractor Exhaust Welding  Dust Filter

Model NO.: SW-493
Certification: CE, RoHS
Condition: New
Customized: Non-Customized
Application: Welding,Chemical Lab,Odor Remover,Medical Health
Noise: Less Than 60-72dB
Air Volume: 235m3/H-300m3/H
Material: Metal+Plastic
Trademark: Suwaie
Origin: China
HS Code: 8414519900

Product introduction
 
Welding fume could be effectively absorbed and filtered in all kinds of welding, grinding and other places as well as for collecting rare metal particles and precious material, and could achieve the purification rate of 99.9%, thereby preventing the environmental pollution. Clean air purification treatment directly in the indoor release.


1 Willdone fume purifying and filtering system is for cleaning of both particles and gases.

2 It's designed to filter the harmful substances, such as hydrocarbon and cyanide, during the

    process of soldering, tin dipping in the solder pot, laser marking, and carving, printing, etc.

3 It catches harmful smoke with freestanding ducts and adjustable air volume to significantly

    improve your working environment.

4 It has a triple-filter system:

    1) Pre-filter: The large size pad filter can filter large particles of dust;

    2) Middle filter: It filters the bigger powders for prolonging the main filter's life;

    3) Main filter: It includes HEPA(high effeciency) filter and gas filter. The HEPA cleans the gas and powders filtering from the pre-filter and then carry them to the gas filter, which with the carbon and other chemical combination, filters off the deleterious substance and then outputs  the clean air.

Industrial Dust Collector Smoke Extractor Exhaust Welding Dust Filter

Working Principle

1. The vacuum pressure air flowing the blower generates enters the purifying chamber through the suction arm or pipe.

2. The dust contained gas is purified in the purifying chamber through the separation of the filter cartridge.

3. Through different ways of cleaning (manual cleaning or automatic cleaning) make the ash cake of accumulating in the surface of the filter
 
4. After cleaning , the clean air through the air duct is exhausted out by blower.

Industrial Dust Collector Smoke Extractor Exhaust Welding Dust Filter
Main feature
 

*Flexible suction arm can rotate 360°and the freedom to stay anywhere

*The machine adopts HEPA filter filtration, the filtration precision could reach 0.1μm.

*Depending on needs, 2m, 3m flexible suction arm are available.

*Strict welding and painting technology achieve to high tightness and corrosion resistance cabinet.

*Specific sound-absorbing materials reduce operating noise to improve operation efficiency.

*This fume extractor use China blower, high pressure, low noise. It can effectively absorb particle and extend filter life of less power.

*Pure-Air fume extractor consist of five parts, they are metal filter, G3 primary filter, F8 class bag filter, HEPA main filter and activated carbon filter.

*Well-proportioned holes to ensure that large dust particles are trapped on the metal filter, to prevent them block the pre-filter.

*F8 class bag filter comprised by non-woven fabrics full-thickness adhesive, can be adsorbed middling particles in the air to avoid main filter is blocked.

*Main filter consists of efficient HEPA element, in independent tests, these filters remove 99.997% of all particles above 0.3 microns and 95% down to 0.01 micron.

*Gas filter layer formed by the chemical materials can effectively remove harmful gases and pungent odor in the air.



Industrial Dust Collector Smoke Extractor Exhaust Welding Dust Filter

Palm Transporter(Crawler Power Spray)

Palm Transporter,Palm Transporter Truck,Crawler Power Spray,Agriculture Palm Transporter

FUZHOU RICHLUX TRADING CO.,LTD , https://www.richautoparts.com