What are the copper tramline installation methods?

The installation method of copper tram lines is generally divided into two types: steel cable chain soft hoisting and cross-arm suspension hard hoisting.

First, steel cable chain soft lifting

Use copper towers or telephone poles to set the copper trolley wire in the air, and the weight is supported by steel cables to ensure that the horizontal copper trolley wire is fixed on the insulating porcelain bottle chain. Several copper trolley wires are placed horizontally with a spacing of about 300 mm. The copper trolley wire is The pulleys or counterweights are used at the ends to ensure that the copper tram lines are safely and reliably in horizontal tension and ensure the reliable power supply of the gantry cranes. (As shown below)

Second, horizontal load suspension hard lifting

The utility model uses a utility pole to set the copper trolley wire in high altitude and the weight is supported by a cross arm to ensure that the horizontal copper trolley wire is fixed on the insulated porcelain bottle clamp. Several copper trolley wires are placed horizontally with a spacing of about 300 mm. The end of the slide wire is used. The terminal overhanging device ensures that the copper tramline can be safely and reliably placed in horizontal tension to ensure the reliable power supply of the gantry crane. (As shown below)

W Beam Guardrail

W Beam Guardrail

Hot dipped galvanized Steel Guardrail /Highway fence and guardrail posts are mainly used for safety traffic barrier protection on highways and first-class highways at home and abroad. Q235 material is used domestically, and Q345 material is used abroad. The steel plate is formed by cold bending and then galvanized and electrostatically sprayed.

Crash Barrier8

Highway Steel Barrier has strong corrosion resistance, bright and beautiful appearance, and high anti-collision strength, which meets the standards of the Ministry of Communications. , In line with GB / T31429.1-2015 "Anti-corrosion Conditions of Expressway Traffic Engineering Components" standard. Requirements of "Waveform Steel Guardrail Part 1: Double Waveform Motorway Guardrail"

Crash Barrier12

Product Name W Beam Guardrail
Material
Q235,Q345
Surface Treatment
hot dip galvanized,color coated
Zinc Coating
350g-1220g/square meter
Length 4320/4130mm
Width 2.5mm-4mm
wave height
81-85mm
wave width
310-315mm(W Beam) / 506mm(Thrie Beam
Standard
National Standard/American Standard/European standard
Capacity
100,000metric tons per year

w-beam guardrail suppliers,steel w beam guardrail,w beam guardrail for sale,w-beam highway guardrail,used w beam guardrail,w beam guardrail cost

Shandong Hengfeng Group , https://www.luhengfeng.com