Die Cutting Extruder Plastic Granulating Machine with PLC Touch Screen

Introduction
Δ Material: PE/PP film, PP Woven/sack Bag, Printed BOPP film
Δ Capacity: 60-800KG/HR
Δ Final pellet size: Φ 3mm × 3mm

Work steps of Die Cutting Extruder Plastic Granulating Machine with PLC Touch Screen:
1. Feeding: As standard design, plastic scraps such as film, filament, raffias are conveyed into the compacting room through belt conveyor; to handle rolls' scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor's room is. Metal detector can be combined with belt conveyor, and can interlock with control system, to warn and stop the system, in case that metal is found in feeding section.


2. Crushing and compacting: The rotary blades of compactor will cut up incoming scraps. Frictional heating caused by high-speed rotary blades will heat and let scraps shrink just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.


3. Plasticization and degassing: A specialized single screw extruder is applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 32 to 34D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiently, especially suitable for heavy printed film and material with some water content.


4. Melt filtration: A regular single-plate/piston double-station screen changer or non-stop double-plate/piston four-station can be installed on the head of extruder to present significant filtration performance. The requirements on the filter technology depend heavily on the quality of the input material as well as the planned use of granules.


5. Pelletizing: Die-face water ring pelletizing system set as the standard granulating method in MLsystem. Self-adjusting pelletizing head for the best granulate quality and long uptime thanks to consistently correct blades pressure. RPM of rotary blades is automatic based on melt extruding pressure. Advanced dewatering vibration sieve combining with horizontal-type centrifugal dewatering presents high performance dried pellets.


Main technical parameter of Waste Film Scrap Plastic Extruder Machine with SIEMENS PLC: In order to match your requirement and provide you a proper quotation, please advise:
• What material do you want to recycle? PE film? PP woven bag? HDPE/PP bottle? Or other plastic?
• What capacity (kg/h) do you want?
• What is the final size (mm) of granules you want?
• Other special requirements about the PE plastic pelletizing machine you want.

Our service:
Before-sale
• Introduce products in detail
• Recommend suitable solution
• Offer test

During manufacturing
• Provide layout and engineering conditions
• Offer screw plan and related documents
• Inform the project processing status
• Ensure the product designed in accordance with technical document

After-sale
• Provide installation, commissioning and training
• Offer spare parts
• Provide necessary technical support and update information

Feel free to contact with me if you want to learn more information.
Contact person: Ms. Laura
Mob.: +86 15962366319 : )

Smart Car Washing Machine

Smart Automatic Car Washing Machine,China car wash machine Factury,car washing machine export

Zhengzhou Shinewash Technology Co.,Ltd , https://www.shinewashtech.com