This hydraulic metal baler is specifically designed for compressing scrap materials such as cans and tanks. A hopper is installed as a feeding device, making the feeding process more efficient and convenient.
Key Features:
- Press scrap thickness under 3mm
- Front bale with fast speed
- Manual operation
**Brief Introduction:**
This machine cold-compresses materials with a thickness of less than 3mm, including disassembled automobile shells, waste buckets, and scrap copper or aluminum, into uniform rectangular bales. It ensures high operational efficiency and consistent bale dimensions. The hydraulic system features an integrated valve block, ensuring stable and reliable performance.
**Product Characteristics:**
1. The longest main cylinder uses quick-action technology, improving efficiency by up to one time compared to similar machines in China.
2. The export model is designed with an integrated main unit and hydraulic system, saving space and eliminating the need for installation.
3. Bales are discharged from the side, resulting in compact and neat packages.
**Technical Specifications:**
| Model | Nominal Pressure (ton) | Material Box Size (mm) | Baler Size (mm) | Productivity (kg/h) | Bale Discharging Mode | Motor (KW) | Machine Weight (ton) |
|------------|-------------------------|--------------------------|---------------------------|--------------------------|------------------------|-------------|-----------------------|
| YD-630A | 63 | 1000×600×500 | 200×200 | 500–750 | Turn over | 11 | 4.5 |
| YD-1000 | 100 | 1000×700×500 | 250×250 / 220×220 / 200×200 | 750–1000 | Turn over | 11 | 5.5 |
| YD-1000A | 100 | 1100×500×500 | 200×200 | 750–1000 | Front bale | 11 | 5 |
| YD-1300B | 130 | 1200×700×550 | 300×300 / 250×250 | 1000–1800 | Turn over | 15 | 6 |
| YD-1300C | 130 | 1200×800×550 | 300×300 / 250×250 | 1500–2000 | Turn over | 15 | 6.5 |
| YD-1350 | 135 | 1400×600×600 | 600×250 | 1500–2000 | Front bale | 18.5 | 7 |
| YD-1600 | 160 | 1200×800×550 | 300×300 | 1500–2000 | Turn over | 18.5 | 7 |
| YD-1600A | 160 | 1600×800×800 | 350×350 | 1750–2250 | Turn over | 22 | 12 |
| YD-2000 | 200 | 1600×1200×800 | 350×400 | 2000–2500 | Turn over / Side push | 30 | 18 |
| YD-2500 | 250 | 2000×1200×1000 | 450×450 | 2250–3500 | Turn over / Side push | 30 | 20 |
| YD3150 | 315 | 2000×1400×1200 | 450×500 | 3750–4500 | Side push | 37 | 32 |
| YD4000 | 400 | 2000×1600×1200 | 500×500 | 4500–6250 | Side push | 45 | 40 |
| YD-4000A | 400 | 2500×1600×1200 | 600×500 | 7500–10000 | Side push | 45 | 50 |
The YD-1350 model is ideal for processing light to medium scrap materials efficiently, offering a balance between capacity, speed, and ease of use. Its front-bale discharge system allows for quick and easy removal of compressed bales, making it a popular choice in recycling facilities and industrial settings.
Sugar Beet Handling Gravel Pump
Product Introduction:
MG serie pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. MG series gravel pumps are designed for continuously handing the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps The advantages of the pump are easy installation and operation, good performance of NPSH and abrasion resistance. Our MG pump is including: Sand Pump , Dredge Pump , Sand Suction Pump, Coarse Sand Pump, Pulp And Paper Gravel Pump, Sugar Beet Handling Gravel Pump .
Product Features:
-Single casing
-Wide wet-passage
-Wear resistant metal wet end part, long service life
-Discharge direction can be oriented at any degrees
-Good performance of NPSH
Application Range:
Size: 4 inch to 14 inch
Capacity: up to 4320 m3/h
Maximum head: up to 80m
Beet Slurry Pump,Sugar Beet Slurry Pump,Corrosion Resistant Pump,Sugar Beet Handling Gravel Pump
SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com