2. After the purchase of mining equipment and equipment arrives, it must organize inspection and acceptance according to the regulations, report the acceptance report, and find the defects or quality problems of the parts. It is necessary to promptly report the information and claims to the manufacturer.
3. All units shall, in conjunction with this system and the specific conditions of their own units, establish and improve the management system and assessment system for the whole process of mining equipment and equipment. Improve the management account, receipt, distribution and consumption records, and prepare relevant reports on a regular basis.
4. After the purchased mining equipment and equipment arrives and the experience is received, it shall be timely and put into use. Equipment, parts and components that are not used for the time must be kept in the warehouse for proper storage, regular maintenance, to prevent sun, rain, rust, damage and loss, and to do fire and anti-theft work.
5. All mines must strengthen the inspection, maintenance and overhaul of mining equipment and equipment to ensure the integrity and performance of mining products.
6. Installation and commissioning of large-scale equipment and key mining equipment must be carried out under the guidance of the manufacturer's technical personnel. During the installation and commissioning process, engineers and technicians must make all kinds of original records and various technical parameters at any time, and indicate whether they meet the installation standards. Equipment that requires quality certification must collect and report all types of quality assurance materials in a timely manner.
7. All equipment must be used and maintained in accordance with the equipment operation (use) maintenance procedures and the integrity of the installation and commissioning . The management of equipment must resolutely implement the principle of combining use and maintenance, so that whoever uses the equipment and who maintains it.
8. Any new equipment that has not been used by the mine enterprise should be inspected by the competent technical personnel before the equipment is put into use, and the operating instructions (technical) should be studied in detail, and the operation and maintenance procedures should be worked out. In order to be delivered. In the initial stage of use, the competent technical personnel should check their operation frequently and provide timely feedback to the equipment management department.
9. All equipment must establish and improve the equipment package mechanism, post responsibility system, operation rules, equipment operation, maintenance and maintenance system; equipment regular inspection system, handover system and other management systems, and strictly in accordance with the system.
10. Establish a system for periodic inspection, testing, maintenance, maintenance and overhaul of equipment to ensure that the equipment is in good condition; eliminate electrical equipment from blasting, strictly prohibit the use of mechanical and electrical equipment that has been eliminated by the state, improve the power supply system and rules and regulations, and strictly implement dual-loop power supply according to regulations. Regularly repair power supply lines and equipment to ensure mine safety.
11. Strictly implement daily maintenance (maintenance) and regular maintenance (maintenance) systems to prevent and eliminate run, run, drip, and leakage, and ensure that equipment is always kept neat, clean, lubricated, safe and reliable.
12. For overhaul of large-scale mining equipment, enterprises with equipment maintenance licenses or related qualifications must be entrusted to undertake maintenance tasks.
13. All mines should conscientiously organize the production and supply of spare parts and accessories for the repair of mining equipment and equipment, and conscientiously carry out the storage and quality control of spare parts, establish and improve the quality acceptance system for spare parts, and strictly prohibit the use of inferior parts.
Di-tertiary Butyl Peroxide is an organic compound consisting of a peroxide group bonded to two tert-butyl groups. It is one of the most stable organic peroxides, due to the tert-butyl groups being bulky. It is a colorless liquid.
DTBP can in principle be used in engines where oxyge is limited, since the molecule supplies both the oxidizer and the fuel
DTBP is an irritant to noses, and eyes and skin. It is also flammable, so it should be handled with care.
DTBP is a liquid dialkyl peroxide. It is an efficient initiator for polymerization of olefins and
acrylic resins, and a modification agent of PP degradation, insoluble in water, soluble in
organic solvents such as toluene, acetone, styrene, etc. Freeing point lower than -30℃.
Miscible in alcohol,esters,ethers,olefins and othe organic solvents Immiscible with water.
20kg jerrycan,160kg steel PVF drum.Store in -30℃-40℃ with efficient air ventilation. Avoid direct sunlight.
Dtbp Peroxide,Di-Tertiary Butyl Peroxide Function,Di-Tert-Butyl Peroxide,Tert-Butyl Peroxide
Jiangxi Zhewei Material Technology Co.,Ltd , https://www.jxzwchem.com