2. The cable project should be specially designed on site to conduct unified command and dispatch of cable laying.
3. The construction personnel who participate in the cable laying should listen to the dispatching command of the field commander, and each of them will not be able to leave the post without authorization.
4. At the job site where the cable is laid, there should be no obstacles that affect the operation. Wear a helmet when working with other professionals.
5. When working on a high-altitude cable tray, wear non-slip shoes and fasten the seat belt to avoid falling from high altitude.
6. When laying the cable, the operator should stand on the outside of the cable and stand firm.
7. When laying cables, it is strictly forbidden to play and laugh, and never allow drunkenness to work.
8. Participate in the workforce, should be healthy, no heart, cerebrovascular diseases and high-altitude work discomfort.
9. When using electromechanical equipment to work together, the power supply of the electric equipment should be reliable. The power supply should be equipped with a leakage protection device and should be well grounded. Arrange for personnel who are familiar with the equipment to operate, and other nearby personnel should maintain a sufficient safety distance with the electric equipment.
10. When laying cables on the high-altitude cable tray, the transfer of the construction equipment items kydl_yyyq is transmitted by the transfer rope. It is strictly forbidden to throw. The ground personnel should avoid the aerial work surface and prevent the items from being bruised.
11. The safety officer shall be responsible and promptly identify potential safety hazards and eliminate and correct them. Those who refuse to obey the command and operate in violation of the rules should give warnings and stop. Avoid the occurrence of security incidents. Make sure that the cable laying operation is carried out safely and smoothly.
Die Sinker EDM, also called erosion EDM, cavity type EDM or spark EDM, consists of an electrode and workpiece submerged in
dielectric fluid. Die Sinker EDM is fast, effective, and can be used to machining virtually any electrically conductive metal material.
It is widely used in mould industry. TipTop Machinery have been developed to prove an ideal mix of Speed, Accuracy, Surface finsh
and Low electrode Consumption.
Die Sinker Edm,Die Sinker EDM,Die Sinking EDM,CNC Sparking EDM
Jiangsu Sailing Intelligent Equipment Co., Ltd. , https://www.sailingcnc.com