Silicon Carbide Ceramic Sliding Bearing

Posted on

Model NO.: Sliding Bearing
Type: O-Ring Mechanical Seals
Balance: Balanced
Function: For Pump, Compressor
Certificate: ISO9001
Trademark: JR
Transport Package: Carton
Specification: As Requirement
Origin: China
HS Code: 8484200090

Mechanical seal with multiple springs available in a wide variety of elastomers for handling practically every industrial fluid. All components are held together by a snap ring in a unified construction design and can be repaired easily on-site.


Mechanical SIC Seal Ring / Silicon Carbide Ring

Silicon Carbide SSIC RBSIC Ring

Description:

Applications:

1. Pumps, mixers, blenders, agitators, refrigeration compressors, blowers, fans, and other rotary shaft equipment.
2. Pulp and paper, food processing, water, wastewater, refrigeration, chemical processing, and other demanding applications.

Polished and precision silicon carbide seal ring

Excellent corrosion resistance, high coefficient of heat conductivity, self-lubricity, low density, high hardness, and also provide customized production.

1. Introduction of Polished and Precision Silicon Carbide Seal Ring:
Sic seal rings have the following main performance characteristics:
Item Unit Sic SSIC
Purity % ≥90 ≥98
Density g/cm³ 3.05 3.1
Shore Hardness HS 110-125 120-130
Elastic Modulus MPa 4.12x10⁵ 4.10x10⁵
Poisson Ratio   0.15 0.16
Tensile Strength MPa 2.75x10² 2.8x10²
Bending Strength MPa 4.41x10² 4.9x10²
Compression Strength MPa 2.94x10³ 3.0x10²
Thermal Conductivity W/m·K 141 147
Thermal Expansion Coefficient 1/°C 4.3x10⁻⁶ 4.0x10⁻⁶
Heat Resistance   1600°C 1650°C
Thermal Impact Coefficient cal/cm·sec 46.5 200
Tolerance mm -0.02 to +0.02 -0.02 to +0.02
Acid Resistance   5 times higher than usual TC Resist all chemical media
Silicon Carbide Ceramic Sliding Bearing Silicon Carbide Ceramic Sliding Bearing Silicon Carbide Ceramic Sliding Bearing Silicon Carbide Ceramic Sliding Bearing


Advantages of Mission SiC Bushing

1. High purity material,
2. Good wear resistance,
3. Fine grinding surface,
4. Tight tolerance.
5. Fast delivery

Mechanical seals could be interchangeable with John Crane, Burgmann, Aesseal, Vulcan, Roten seals, etc.
 
All ranges of mechanical seals for Flygt Pumps, Grundfos Pumps, Alfa Laval Pumps, APV Pumps, Grindes Pumps, Fristam, ABS, Alleeiler, EMU, GEA Tunchenhagen, Godwin, Hidrostal, Hilge, Johnson, Lowara, Waukesha, Vogelsang Pumps, etc.
 
At the same time, we could manufacture seals according to your sample or drawing, and design as your request.
 
With advanced designer & manufacturer of mechanical seal, for industrial pump, its range involves in: industrial pump mechanical seal, mixer and agitator seal, cartridge seal, metal bellows seal, auto cooling pump seal, and auto air-condition compressor lip seal.
It is widely used and highly reliable in food, drink, petroleum, chemistry, refinery, paper making, pharmacy, power and auto industry, etc.
 
Characteristics:
High and low temperature resistant, acid-alkali resistant, ozone resistant, aging resistant, weather resistant, good insulation property, anti-toxic, good air-permeable, etc.
 
Welcome to quote for more details. 
Silicon Carbide Ceramic Sliding Bearing

Silicon Carbide Ceramic Sliding Bearing

Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade service.

Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. Usually they're free.

Question 3: Where is your factory located? How can I visit there?
Answer: Our factory is located in Ningbo, China. You can fly to Ningbo or Shanghai airport directly. All our clients, from home or abroad, are warmly welcome to visit us!

Question 4: How does your factory do regarding quality control?
Answer: Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001 authentication.

Question 5: How about the lead time?
Answer: Within 10-20 days after getting the prepayment.

Question 6: How can we pay?
Answer: For small sample shipping cost, you can pay either by PayPal or by T/T. And by T/T at sight for large amount of the order.

Question 7: If OEM available?
Answer: Yes, we provide all of our products OEM/ODM service.

Question 8: If I can buy pumps or pump parts from your company?
Answer: Yes, we also provide pumps and pump parts, such as Lobe pumps, Compound & homogeneous pumps, Homogeneous & emulsification pumps, and so on. Please kindly visit our website: www.supseals.com

Tungsten Carbide Cutting Tools

When you need tools that can handle the hardest materials and toughest conditions, our Tungsten Carbide Cutting Tools are the answer. Made from ultra-strong tungsten carbide, these tools are built to last, offering unmatched hardness and wear resistance. Whether you’re cutting, drilling, or shaping, our tools deliver precision and durability, saving you time and money.

Why Choose Our Tools?

Super Hard Material: Tungsten carbide is one of the hardest materials out there, making our tools perfect for cutting through tough stuff like metal, concrete, and rock.
Long-Lasting: These tools don’t wear out quickly, so you spend less on replacements and downtime.
Precision Performance: Designed for accuracy, they help you get the job done right the first time.

Who Uses These Tools?

Manufacturers: For cutting and shaping metal parts with precision.
Miners: For drilling through hard rock and ore.
Construction Teams: For cutting concrete, asphalt, and other tough materials.

Custom Solutions for Your Needs

We know every job is different, so we offer custom tools tailored to your specific requirements. From unique shapes to special sizes, we’ve got you covered. Plus, our team is always here to help you choose the right tool for the job.
Choose Tungsten Carbide Cutting Tools for tools that work as hard as you do. Get in touch today to find the perfect solution for your needs!

double cut carbide rotary burr set, tungsten carbide tools, tungsten carbide rotary burrs, tungsten carbide burr set, carbide burrs for die grinder

Zigong Tianyi Industry Co., Ltd , https://www.tyalloypins.com