Warranty: 3 Years for motor and controller. Solar panel is optional with a 20-year warranty.
Installation Instructions:
1. Wiring the Pump
Connect a longer cable to the pump (cable size must be at least 1.5mm²). Use the parts in the cable connector kit (heat-shrink tube and tape) to connect a longer supply wire to the pump. If you don’t have a heat gun, the barrel of your soldering iron can work, or you can use a butane torch with caution to avoid melting the insulation or causing a fire. Bare the insulation back as shown.
A. Layout the components needed to make the connection
B. Place the large diameter heat-shrink over the main cable and then the smaller pieces over the individual wires. Keep the heat-shrink away from the joints while soldering.
C. Slide the small heat-shrink over the soldered joints and heat using a heat gun or alternative heat source to shrink it over the wires.
D. Wrap the tape over the sealed joints.
E. Finally, slide the large diameter heat-shrink over the completed joint and shrink it.
Place the pump in water before wiring the controller box to allow it to go through pre-conditioning. Do not place the pump in its final position until tested, unless it’s easy to access and remove.
Solar Pump Control Box Features:
A. Low-voltage protection (automatic)
B. Over-current protection (automatic)
C. Protection for low water level in well (AB sensor)
D. Protection for full water level in tank (LH sensor)
E. Motor speed control (speed regulator)
F. Delay working when the tank is full (a timer delays operation for 30 seconds when the tank is not full)
G. MPPT function (Maximum Power Point Tracking)
H. Battery option available (can be used with solar charger battery system)
[Image: 24V Solar Water Pump with 200W and 300W Solar Panels, Stainless Steel Body Screw Pump]
[Image: 24V Solar Water Pump with 200W and 300W Solar Panels, Stainless Steel Body Screw Pump]
[Image: 24V Solar Water Pump with 200W and 300W Solar Panels, Stainless Steel Body Screw Pump]
[Image: 24V Solar Water Pump with 200W and 300W Solar Panels, Stainless Steel Body Screw Pump]
[Image: 24V Solar Water Pump with 200W and 300W Solar Panels, Stainless Steel Body Screw Pump]
[Image: 24V Solar Water Pump with 200W and 300W Solar Panels, Stainless Steel Body Screw Pump]
This solar-powered screw pump model SCREW PUMP 3SS is designed for submersible use in clean water applications. It operates on DC power and is ideal for well water systems. The pump uses magnetic startup technology and features a powerful DC screw pump mechanism. The product is manufactured in China and has an HS Code of 8413709190. It comes in a wooden crate packaging and has dimensions of 52.5 x 32 x 13 cm. The trademark is "Mr. Pumpboy." This reliable system ensures efficient and long-lasting performance, making it a great choice for off-grid and remote water pumping solutions.
LYNK&CO Electric Car,Electric Vehicle,Eco-Friendly Car
Chongqing Yuntu Automobile Trading Co., Ltd. , https://www.yuntuauto.com