How to improve the efficiency of slurry pump

Different people, doing the same thing, use different time, which is caused by the different efficiency of each person. Similarly, the slurry pump has its own working efficiency, the working efficiency of the slurry pump is high, and the working speed is fast, which will save a lot of time. Below for your interpretation of how to improve the working efficiency of the slurry pump.

First, the direction of rotation of the motor is adjusted. The direction of rotation of the motor should be consistent with the specified direction and must not be reversed, otherwise it will cause the slurry pump impeller to trip or damage Other components. The pump should be completely disconnected from the motor and then check the motor's direction of rotation.

Second, the addition of lubricants. The oil-lubricated brackets should be filled with the oil specified in the “Operating Instructions” in accordance with the position of the oil-lined oil line before driving.

Third, check and adjust the gap between the impeller and the front guard. The general gap should be 0.75-1.0mm.

Fourth, the adjustment of the transmission. The use of elastic pin coupling transmission should be good pin and protective cover. Belt-driven, should be a good belt, adjust the tension, and a good protective cover.

Fifth, clean up the tools and debris placed on the slurry pump unit to prevent accidents during pump operation.