The numerical control decoiling leveling line is mainly used for feeding trolleys, unwinding machines, slitting machines, edge trimming machines, shearing machines, stacking devices and the like. At the same time, there are swingable intermediate bridges and traction devices between the machines. Deviation correction device, numerical control feeding lengthening device, etc. The production line gathers machine, electricity, liquid, gas in one automatic coil handling equipment.
The use of numerical control type decoiling straight line Note points:
1. In the operation of decoiling and leveling line, you cannot select forward/reverse rotation, but stop first; after emergency stop, open and then select forward/reverse rotation; when coiling material, note that the sheet material should not touch the wire to prevent the wire from being torn.
2. After a long time use, check whether there is loosening of the screw. If loose, tighten it with a wrench. If you encounter professional problems, you must ask the professional to deal with it;
3, pay attention to the maintenance of the leveling machine, where there is a butter mouth, add butter once a month. Mainly the lubrication of bearings! Pay attention to the cleanness of the roller surface, do not allow welding slag, short boards or other things to fall into the roller, so as not to damage the leveling roller.
4. When someone checks or repairs or refuels, they must ensure that the machine's power supply is completely cut off. When starting up, pay attention to whether someone is too close to the machine.
5. Establish safety awareness and pay attention to personal safety. All the rotating parts of the leveling machine can not be approached!
The above is a note about the use of the numerical control type decoiling straightening line.
What is a lighting part? except the light source, it includes all the components used for fixing and protecting the lighting source, as well as the necessary circuit connected to the power supply.
Modern lamps includes household lighting, commercial lighting, industrial lighting, road lighting, landscape lighting, special lighting, etc. From the birth of electricity, incandescent bulbs appeared as the earliest home lighting, later improved to the fluorescent tube, then to energy-saving lamps, halogen lamps, halogen tungsten lamp, special material gas discharge lamp, till LED lighting, the lighting lamps and lanterns, most of them developed under the development of light sources, such as from the light to fluorescent stents to all kinds of craft lighting, etc.
As an Aluminum Die Casting manufacturer, the lamp housing is a important business in our factory.
Lighting Parts,Led Lighting Parts,Powder Coated Lamp Parts,Led Light Spare Parts
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.blcastings.com