In fact, for the sweeping of the road environment, the 6-way sprinkler is the first choice. Because whether it is for the cleanup of the highway traffic environment or for the environmental cleanup of the construction site, the 6-party sprinkler can achieve one-step position, and can resolutely prevent the secondary pollution of the air environment, as well as the situation of cross-flow of sewage. Compared to ordinary road sprinklers in the past, it is often the case that a full range of non-purpose water jets is used, and then there is a very serious cross-flow of sewage, and the entire surface is stained with oil. Therefore, it is said that the use of 6-way sprinklers is the preferred product for road traffic environment cleanup.
The 6-way sprinkler truck can not only clean up all aspects of highway traffic and rail traffic, but also can effectively recycle garbage, control pollution in the air, and can transport water. Therefore, the function of the 6-way sprinkler is also very complete. And in the market is also in short supply, because many cities in the big rectification and cleaning can not be separated from the six-way sprinkler. It can not only play the role of watering, but also can carry out long-distance water injection.
Different from the ordinary road cleaning vehicles in the traditional sense, the structural design and manufacturing of the 6-party sprinklers are very unique and they are all very authoritative. And the stability of the system architecture is also very safe and reliable. Therefore, in the driving process of the cockpit, the past bumps and shakes in the past are firmly avoided. At the same time, the performance of different modules of the six-way sprinklers is also very standard, and the metal materials used for the top coat and system architecture are all up to the national standard. All of them also strictly follow the relevant regulations of the Environmental Pollution Protection Law, so that not only the appearance is quite beautiful, but also the cost performance is very high and the working speed is very fast.
The key point is that the effective output area of ​​the 6-way sprinkler is very large, and the conversion ratio is also very high, and the key is that the spray distance of the water body is also quite long. In this way, for some flower beds and garden areas located far away from the road and located in the public square, the 6-way sprinkler can achieve very accurate watering. And in some areas where construction sites have very serious dust pollution, the 6-way sprinkler can spray water mist so that the water mist and dust and all kinds of dust particles are fully in contact and absorbed, thus falling on the ground and then proceeding Comprehensive control and cleaning.
Not only that, parts used in the 6-party sprinkler, especially the noise of the main fan, are very low, basically working in a silent state. And the output power is also very low energy consumption, so there are also low-carbon regulations for green environmental protection are also fully learn from and adopted, and the performance stability of the main fan is also very strong. Therefore, all aspects of the 6-party sprinkler are in line with national standards and requirements, so it is worth the relevant personnel to purchase and fully reference.
A Trapezoidal Sheet Roll Forming Machine is a regular metal sheet roll former that produces metal roofing sheets or roof panels for both individual and industrial building.
Trapezoidal roofing sheets are the most popular metal roof panels not only for residential buildings but also for commercial or industrial buildings. There are so many different profiles for a variety of applications. People like to use low-profile trapezoidal sheets for elevation and IDT roofing, while for wide-span roofing and load-bearing structures, they tend to select high-profile trapezoidal sheets. In addition, trapezoidal sheets have other names in Africa as industrial trough IT4, IT5, IT6 roof profiles, therefore people can barely find two exactly the same trapezoidal sheet Roll Forming Machine in the markets.
Brief introduction of Trapezoidal Roof Sheet Roll Forming Machine:
TR750 Trapezoidal Sheet Roll Forming Machine
This trapezoidal sheet roll forming machine produces trapezoidal sheets from colour ppgi, gi, aluzinc sheets, and sometimes aluminium steel coils (aluminum roof panels are prefered in Nigeria). Generally, material thickness varies from 0.3 to 0.8mm, and width varies from 914mm to 1250mm. However, in some applications, material thickness can reach up to 1.5mm, like roof deck. Furthermore, in some countries or areas, people use G550 material to make full hard metal roofing sheets.
Sometimes when a client needs to produce trapezoidal sheets with different effective widths with anything else remained the same. In this case, the investment shall be made on only one machine, because a trapezoidal Roof Panel Roll Forming Machine is always adjustable for different feeding widths. This means you can make trapezoidal roof panels with different effective widths from different-width materials. However, a client must need two trapezoidal sheet roll forming machines for manufacturing two panels at the same time.
Just like the regular roof sheet roll former, a trapezoidal sheet roll forming machine typically consists the components as following:
- Manual Decoiler
- Entry/feeding Guide
- Roll Forming Unit
- Hydraulic Unit
- Cutting Unit
- Control system
- Runout Tables
Technical Parameters of Trapezoidal Sheet Roll Forming Machine:
- Uncoiler: Manual Uncoiler (a Hydraulic decoiler is optional);
- Inner diameter : 480-520mm;
- Outer diameter: 1250mm;
- Loading weight: 5TONS;
- Material width: 914-1250mm;
- Material thickness: 0.3-0.8mm (sometimes upto 1.5mm maximum, depends on techncial requirements);
- Forming speed: 0-12m/min (high speed is optional as per request);
- Forming stations: 16-22 forming stations (subject to the technical drawing of profiles)
- Roll forming stands structure: conjoint type
- Material of Roller: high quality 45#steel with the surface mirro polishing and coated with hard chrome 0.05mm.
- Material of Shafts:45# high-quality steel;
- Diameter of Shafts: 70mm (80-90mm if the thickness over 1mm);
- Thickness of Siding Plate: 18mm;
- Transmission: by chain-brackets;
-
Motor Power: 5.5 KW
- G550 Full Hard Trapezoidal Roofing Sheet Roll Forming Machine with safety guard equiped
- Material of cutting blade:Cr12 with quenched treatment 60-62 degrees;
- Hydraulic Power: 4KW;
- Cutting Lengths and Quantities: Customer can set required lengths and quantites clients through the touch screen on PLC control box.
- Cutting tolerance: +/-2mm
- Control system: Panasonic PLC, Inverter, CHNT transformer and HMI
- Voltage: 380V/50HZ/3phase
There are different names for trapezoidal sheet roll forming machines in some regions or areas! For example, in Africa, people like to metra roll forming machine, and sometime they give the name industrial trough IT4, IT5, IT6 roof sheet roll forming machineetc.
MAXON designs and builds customized trapezoidal sheet roll forming machines. For instance, some customers ask for G550 metal roofing sheet roll forming machine, some customers may prefer a separate forming stands structure trapezoidal sheet roll forming machine, or some customers may need safety guard on the roll forming machine body etc.
Trapezoidal Sheet Roll Forming Machine
Trapezoidal Sheet Roll Forming Machine,Trapezoidal Joint Type,Tile Making Machine,Metal Sheet Roll Forming Machine
Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com