Things to keep in mind about the work environment of WEDM:
1. First of all need to pick a place without dust, to prevent leaving a lot of channels around the cut;
(1) The inherent characteristics of the cut wire discharge machine in the air, there will be a certain amount of dust in the air, which will cause the machine's screw rod to have a certain chance of severe wear, and then affect the life of the machine;
(2) The wire-cutting discharge machine is controlled by the computer. The disk used by the computer is very strict with the dust in the air. When the dust in the disk enters, the disk will be damaged and the hard disk will be damaged.
(3) The wire-cutting discharge machine itself emits a lot of heat, so the internal needs of the electrical cabinet often change air. If there is too much dust in the air, it will accumulate on the various electrical components during the air change process, resulting in poor heat dissipation of the electrical components. Then cause the board to burn out. Therefore, the machine dust screen should be cleaned frequently.
2. Pick locations that can accept machine tool components;
3. Picking places where there is no oscillation and impact, the medium-cutting wire cutting machine is a high-precision processing equipment. If there is local oscillation and impact, it will cause severe damage to the machine table, and then seriously affect its machining accuracy. Shorten the service life and even render the machine obsolete.
4.Satisfy the space scale requested by the thread cutting machine in the servo;
5. Select a location where the temperature changes little, and prevent the sunlight from passing through the windows and the top window and directly approaching the warm current
(1) The commodity demand for high-precision parts processing is performed at a stable temperature, usually room temperature 20C;
(2) Since the medium wire cutting machine itself generates a considerable amount of heat during its operation, if the temperature is changed too much, it will have a severe effect on the service life of the machine.
6. Selection of shielded houses: Because the process of wire-cut EDM is attributed to the process of arc discharge, intense electromagnetic waves will occur during the process of arc discharge, and then damage will be caused to human health and affect the surrounding environment.
7. Choose a well-ventilated, spacious factory so that operators and machine tools can work in the best environment.
All kinds of Cultivator for Tractor, By keeping track with the latest market developments, we are engaged in manufacturing and supplying the finest quality assortment of Tractor Cultivator. These cultivator are available in various colors, different designs and varied other sizes for our valued clients. Extensively cherished for their varied attributes, these are manufactured by our professionals as per the international quality standards.
Benefits with ZH Tractor:
The Hi-tech hydraulic technology helps faster lifting and lowering of the cultivator.
The track width of the rear and front tires can be adjusted as per the size of cultivator which prevents crop damage.
More torque at less RPM gives better fuel economy.
Cultivator
Soil Cultivator,Field Cultivator,Garden Tiller,Garden Cultivator
ZH MACHINERY , http://www.sczhmachinery.com