Card's main operating steps:
1. Issue a new card: (Applicable to the first employee or student card issue or new employee or student)
Card Management --- issue a new card --- put a new card on the card reader --- read the card --- input (name, department, deposit amount, etc.) --- write the card 2. save money into the card : (for employees or students to keep money)
Save money into the card---put the employee or student's meal card on the card reader---Read the card---Enter the deposit amount---Write the card 3.Recover the old card:(Apply to the employee or student leaving) ( Note: The collected data must be collected before collecting old cards.)
Collect old cards - place employee or student's meal card on the card reader - read card - write card 4. report card loss: (applicable to employee or student card missing or need to report the loss after the card is broken) (Note: The card must be collected before the loss of the card and the card reader must be connected.)
Lost card --- Enter employee or student card number --- press Enter --- OK 5. Card release: (Applicable to employee or student card lost after the report was lost) (Note: Before the card is released Need to collect the data and connect the card reader
Card unbundling—putting employees or students’ meal cards on the card reader—reading cards—writing cards 6. Renewing new cards: (Applicable to renewing new cards after employees or student cards are lost or broken) (Note : Need to collect data before re-supplying new card and connect to the credit card reader.)
Resend a new card ---enter employee or student card number --- press Enter --- insert a new card in the card reader --- read the card --- the main steps to write a card check account:
1. Card information table: (Applicable to query staff or student card number, department, card balance (after the need to collect data) and other information)
Data Management --- Card Information Table --- Confirmation 2. Consumption Schedule: (Applicable to query employees or students for a certain period of time consumption record details and other information) (after the need to collect data)
Data Management --- Consumer Explicit List --- Consumer Schedule --- Enter the correct date and time --- Query 3. The details of the funds: (Applicable to query the employee or the student for a certain period of time all the details of deposit records, etc. information)
Data Management --- Capital Details --- Enter the correct date --- Query 4. Consumption Flow Summary: (Applicable to the credit card machine for a certain period of time summary information) (after the need to collect data)
Data Management - Consumption Flow Summary - Enter the correct date - Determine 5. Operator Flow Summary: (applicable to the operator for a certain period of time all saved money summary information)
Data Management - Operator Flow Summary - Enter the correct date - Determine the main operating steps of the consumer (This operation requires connection of all credit card readers)
1. Download the system control parameters: (Applicable to download the consumption machine information after updating the software parameter settings)
Consumer Management - download system parameters --- download system control parameters --- determine 2. download consumer basic parameters: (applicable to update the consumption of machine time, update the software settings after downloading consumer machine information)
Consumer Management - download system parameters --- download the basic parameters of the consumer --- 3. download the loss report form: (applicable to the card loss report, the card is not timely connected to the credit card hanging machine)
Consumer Management - Download System Parameters - Download Loss Report - Determine System Management Main Operation Steps 1. Password Modification: (Applicable to Change Password)
System Management - Account Management - Password Change - Enter Initial Password - New Password - OK 2. Reader Port Update: (Applicable to Card Reader USB Change Out)
Computer Desktop Find "My Computer" Right-Click - Properties - Manage - Device Manager - Port - Find Pro... (comX); System Management - User Preferences - User Advanced Parameter Settings - Read and Write Ports Change to Above See the comX, OK 3. System exit: (applicable to shut down software backup data)
System exit - whether to back up data - yes - start - off, the above is the main operation steps, other functions please read the software manual carefully
1. Issue a new card: (Applicable to the first employee or student card issue or new employee or student)
Card Management --- issue a new card --- put a new card on the card reader --- read the card --- input (name, department, deposit amount, etc.) --- write the card 2. save money into the card : (for employees or students to keep money)
Save money into the card---put the employee or student's meal card on the card reader---Read the card---Enter the deposit amount---Write the card 3.Recover the old card:(Apply to the employee or student leaving) ( Note: The collected data must be collected before collecting old cards.)
Collect old cards - place employee or student's meal card on the card reader - read card - write card 4. report card loss: (applicable to employee or student card missing or need to report the loss after the card is broken) (Note: The card must be collected before the loss of the card and the card reader must be connected.)
Lost card --- Enter employee or student card number --- press Enter --- OK 5. Card release: (Applicable to employee or student card lost after the report was lost) (Note: Before the card is released Need to collect the data and connect the card reader
Card unbundling—putting employees or students’ meal cards on the card reader—reading cards—writing cards 6. Renewing new cards: (Applicable to renewing new cards after employees or student cards are lost or broken) (Note : Need to collect data before re-supplying new card and connect to the credit card reader.)
Resend a new card ---enter employee or student card number --- press Enter --- insert a new card in the card reader --- read the card --- the main steps to write a card check account:
1. Card information table: (Applicable to query staff or student card number, department, card balance (after the need to collect data) and other information)
Data Management --- Card Information Table --- Confirmation 2. Consumption Schedule: (Applicable to query employees or students for a certain period of time consumption record details and other information) (after the need to collect data)
Data Management --- Consumer Explicit List --- Consumer Schedule --- Enter the correct date and time --- Query 3. The details of the funds: (Applicable to query the employee or the student for a certain period of time all the details of deposit records, etc. information)
Data Management --- Capital Details --- Enter the correct date --- Query 4. Consumption Flow Summary: (Applicable to the credit card machine for a certain period of time summary information) (after the need to collect data)
Data Management - Consumption Flow Summary - Enter the correct date - Determine 5. Operator Flow Summary: (applicable to the operator for a certain period of time all saved money summary information)
Data Management - Operator Flow Summary - Enter the correct date - Determine the main operating steps of the consumer (This operation requires connection of all credit card readers)
1. Download the system control parameters: (Applicable to download the consumption machine information after updating the software parameter settings)
Consumer Management - download system parameters --- download system control parameters --- determine 2. download consumer basic parameters: (applicable to update the consumption of machine time, update the software settings after downloading consumer machine information)
Consumer Management - download system parameters --- download the basic parameters of the consumer --- 3. download the loss report form: (applicable to the card loss report, the card is not timely connected to the credit card hanging machine)
Consumer Management - Download System Parameters - Download Loss Report - Determine System Management Main Operation Steps 1. Password Modification: (Applicable to Change Password)
System Management - Account Management - Password Change - Enter Initial Password - New Password - OK 2. Reader Port Update: (Applicable to Card Reader USB Change Out)
Computer Desktop Find "My Computer" Right-Click - Properties - Manage - Device Manager - Port - Find Pro... (comX); System Management - User Preferences - User Advanced Parameter Settings - Read and Write Ports Change to Above See the comX, OK 3. System exit: (applicable to shut down software backup data)
System exit - whether to back up data - yes - start - off, the above is the main operation steps, other functions please read the software manual carefully
Model: XY-C800 XY-C1200
Specifications:
The tyre cutting machine is applied to cut all kinds of rubber blocks and strips,it is good for cutting rubber tyre,rail tyre, rubber strips etc.
Advantages:
1.This machine with large cutting knife,good shearing effect,fast cutting speed and low energy consumption;
2.Small size, easy to move;
3.Adopt hydraulic system, easy to operate and very safe design.
Tyre Cutter,Tyre Cutting Machine,Tire Cutting Machine,Tire Cutter
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com