·Shanghai electric vehicle charging infrastructure construction technical specifications approved

Posted on

According to the Shanghai Municipal Urban and Rural Construction and Transportation Committee document “Notice on Approving the Technical Specifications for the Construction of Electric Vehicle Charging Infrastructure” (Shanghai Construction [2012] No. 549), the Shanghai Electric Power Company is responsible for and Shanghai The Technical Specification for Electric Vehicle Charging Infrastructure Construction, jointly edited by Jiaotong University and Shanghai Electric Power Design Institute Co., Ltd., has recently passed the review and approval of the Shanghai Construction Communications Commission as the Shanghai Engineering Construction Code (No. DG/TJ08-2093-2012) ), and will be implemented on July 1, 2012.
The construction of electric vehicle charging and replacing facilities is one of the key contents of the State Grid Corporation's strong smart grid planning. It is also an important work in the field of smart grid construction in large and medium-sized cities in China. It is of great significance for realizing China's low carbon development and energy saving. . In response to the construction planning and standards for electric vehicle charging and replacing facilities, the Shanghai company actively communicated with government functional departments to ensure that the “normative” is consistent with the corporate standards of the State Grid Corporation. Especially in the electric vehicle charging and replacing facilities combined with urban construction, charging and replacing facilities and 110 kV / 35 kV transformer substation integration construction, charging and replacing facilities to access the grid requirements and charging and replacing facilities construction A lot of research work has been done on the norms and other aspects, and the standards of the Ministry have been compiled on the basis of scientific research work.
The Technical Specification for Electric Vehicle Charging Infrastructure Construction is the first local standard issued by Shanghai for the construction and design of electric vehicle charging infrastructure. It will be of guiding significance for the standardized construction of electric vehicle charging facilities in Shanghai.

Air-Fluid Male Swivel Elbow - Male Thread BSPT


Cixi Air-Fluid Company 'BSPP Thread Metal Pneumatic Push In Fittings with below characteristics:


BSPP Thread Introductions : The British Standard Pipe Parallel (BSPP Threads )have the same diameter from end to end ,A parallel thread typically seals with use of an o-ring or Back Washer to seal the fittings ,no use of Anaerobe. The sealing ring (O-ring) can be easily replaced if it is damaged or hard-worn with time. Connection and disconnection of the tube can be repeated and can be performed using one hand , no other tools required .


Thread Connection : Range from BSPP 1/8" to 1/2"

Push-in Connection: Range from Inch Size 5/32" to 1/2" OD & Metric Size 04mm to 16MM

Configurations Includes: Straight , Elbow , Branch Tee ,Run Tee, Long Leg Male Elbow and Speed Control Valve .





Metal Pneumatic Push In Fittings BSPP

Metal Pneumatic Push In Fittings BSPP, Pneumatic Push In Fittings, Metal Pneumatic Fittings

Ningbo Air-Fluid Pneumatic Components Co., Ltd , http://www.air-fittings.com