Introduction of common mineral processing methods for platinum group elements

Currently in terms of extracting platinum group metals, used mainly in industry re-election, flotation and their joint process, which is the most widely used flotation.

1, reselection: a platinum group metal mineral density are 7 g / cc or more, especially natural metal and an intermetallic compound more than 10 g / cm, common natural platinum, platinum mines crude, osmium, iridium ore as high as 15 ~22 g / cm3, not only much higher than the common gangue (generally 2.5 ~ 2.75 g / cm3, a few up to 4.3 g / cm3), and higher than the common base metal minerals (generally density 3.6 to 5.5 g / cc, only individual minerals such as galena 7.2 to 7.6 g / cc, but is rare in platinum ores).

Therefore, as long as the particle size is large (generally greater than 0.04 mm), the monomer can be dissociated and re-selected for enrichment. It is generally used to treat platinum group metals with larger particle size of platinum group metals in gab mines and ore. For some platinum ores, it is often supplemented by amalgamation or magnetic separation processes to improve concentrate grade and recovery.

2, flotation: Platinum group minerals are more hydrophobic and can adhere to the bubbles, and most of the resources currently mined, fine-grained platinum group minerals are usually symbiotic copper , nickel- sulfur minerals, so flotation has become today Platinum-containing minerals are the most important and the most widely used mineral processing tool.

However, due to the high density of the platinum group minerals, when the particle size is large, the re-election method is supplemented, that is, the heavy and floating combined processes can be more effectively and comprehensively recovered. Flotation is currently mainly used to treat copper sulfide ore, so that platinum group minerals and copper and nickel sulfides are recovered together. The sorting effect of platinum group metal minerals is related to various factors such as grinding fineness, medium acidity, type and amount of medicament, and process arrangement. Experiments are often required on the characteristics of different ores to determine reasonable process and technical conditions.

3. Combined process of heavy and floating: For ore with larger particle size of platinum group minerals, the combination of re-election and flotation can make full use of the advantages of both and obtain better results.

The Russenberg Platinum Company of South Africa used the heavy-floating combined method to treat platinum-containing oxidized and sulfided ore in the 1930s. After the flotation of the Wattwell plant in the 1960s, it was re-elected with a suede chute. “Russenburg Platinum Minerals” (containing platinum 30% to 35%, palladium 4% to 6%, gold 2% to 3%, 钌 0.5%) and mixed flotation concentrates (containing platinum group metals 110 to 150 g/cubic In centimeters, the ratio is: platinum 63%, palladium 24%, 钌 5.3%, 铑 3.9%, 锇 3.0%, 铱 0.9%), and the total recovery of platinum and palladium is about 90%. Share to: -- The content of this article is for reference only and does not constitute investment advice. Investors operate on this basis at their own risk.

PN6 Flange is a rating of nominal pressure, full nominal pressure of PN have PN6 PN10 PN16 PN25 PN40 for Hyupshin Flange Supplying. Norms of DIN EN1092-1 BS4504 GOST33259-2015 and NFE29203 are have nominal pressure rating, PN6 flanges are low pressure rating and used in low pressure piping, PN6 flange thickness is less than PN10-PN40.

PN6 Flange

Pn6 Flanges manufacturer, din2573 2631 2565 pn6 flange, en1092-1 pn6 flange, bs4504 pn6 flange, gost33259 pn6 flange

Jinan Hyupshin Flanges Co., Ltd , https://www.iflange.com